U-Shape Rubber Hot Water Bottle With Fleece Cover

Ingredients: Rubber Bottle, 100% Polyester Cover

Safety Warnings: Before using a hot water bottle remove the cloth cover and check it for cracks, splits, brittleness, breaks and other damage. Check the stopper and the rubber washer for wear and damage prior to use. Prior to filling, put the cover back. Heat the water in a kettle, using cold tap water. Do not fill the bottle with water from the hot water tap, which can cause the rubber to perish. Do not use boiling water to avoid the risk of burns. If the water is very hot, add cold water from the tap. Recommended water temperature not to exceed 50 degrees C. Wear rubber household gloves, hold the neck hot water bottle from the stiff section from which you will be filling the water. Position in a 40 degree angle on a surface. Place over the sink and hold the funnel away from your body when filling it to avoid water splashing back at your hands, face or body. Pour approx. 1 liter of water slowly into the bottle. Do not overfill as this might cause the bottle to burst. Remove excess air from the bottle before closing it. Put the stopper and tighten it. Make sure the funnel is empty of water. Screw the stopper sufficiently tight to ensure that there is no leakage. Finger tight should be adequate. Hold bottle up-side-down over sink, away from body and squeeze lightly to check for leaks.

Origin: Made in Sri Lanka