WARNING: To avoid risk of electrical shock, always make sure th eproduct is unplugged from the electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it. Warning: Handling the coated electrical wires of this product exposes you to lead, a chemical known to the State of California to cause cancer, birth defects, and other reproductive harm. WASH HANDS AFTER USE. 2 When using this or any other electrical appliance, always follow these basic safety precautions: Signal Word Definitions NOTE: These are definitions only and may not pertain to the specific product purchased. DANGER  Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Usage of this signal word is limited to the most extreme situations. WARNING  Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION  Indicates a potentially hazardous situation, which, if not avoided, may result in minor/moderate injury or product/property damage. It also alerts against unsafe practices. WARNING: To avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it. WARNING: Handling the coated electrical wires of this product exposes you to lead, a chemical known to the State of California to cause cancer, birth defects, and other reproductive harm. WASH HANDS AFTER USE. !! WARNING--To reduce the risk of fire, electric shock, or serious personal injury:  Keep the product out of the reach of children and pets. This product is not intended for use by children. Extra caution is necessary when using this appliance near children.  Always ensure the product is unplugged from the electrical outlet and allowed to cool before handling, adding/removing water, relocating, or cleaning it.  Do not leave the product unattended while it is in use. Always unplug the product from the electrical outlet when not in use or if left on an ironing board.

METAL, PLASTIC

Assembly Required: N
Cord Length: 8 ft
Cord Polarized: N
Disposable Part: N
Height: 5 1/4 in
Length: 9 1/2 in
Tools Required: N
UL Listed: Y
Wattage: 120V 60Hz
Weight: 2.2 lbs
Width: 4 1/4 in

Before First Use Remove any stickers, adhesives attached to the Soleplate. (Rub gently with a soft, damp cloth if needed). CAUTION: To avoid damage to the product, do not clean using abrasive chemicals/pads. To Use CAUTION: To prevent scratching of the Soleplate, do not allow the product to come into contact with abrasive objects (e.g., zippers, buttons) while ironing. Cover these items with a press cloth before ironing. NOTES:Due to the initial heating of the materials used in the manufacturing of the product, some light smoke/vapors may be release when used for the first few times. This is normal. Moisture may initially be present in the water reservoir. 1.Ensure the product is unplugged from the electrical outlet and the Temperature Dial is set to the 0 (Off) position. 2.Place the product upright on a flat, stable, heat-resistant surface, and then plug the product into a standard 120V AC electrical outlet. 3.Select Steam or Dry Pressing by pressing the Steam/Dry Button to the desired position (Dry is the down position). Refer to the Dry Pressing or Steam Pressing sections for detailed instructions. 64.Slide the Temperature Setting Lever to the desired setting (reference the Temperature Setting Guide on the product) for the fabric to be ironed and verify the red Power Indicator is illuminated. CAUTION: Check the garment/fabric label for the fiber content. If the garment/fabric is made of blended fibers, turn the Temperature Dial to the fabric with the lowest temperature setting before ironing. 5.Allow the product to heat (1-2 minutes) to the selected temperature setting before ironing. 6.When finished, turn the Temperature Dial to the 0 (Off) position, and then unplug the product from the electrical outlet. WARNING: Always unplug the product from the electrical outlet when it is not in use or will be left unattended. 7.Allow the product to cool completely

Manufactured in: China
Material - Country of Origin: China